Aluminum glass door lock is a common door lock material in the home

Every home has a door, and every door has a matching lock. A matching lock can make the function of the door more perfect, with the effect of painting the dragon's eye. Aluminum glass door lock is a common door lock material in the home, its light weight, high strength, durable, environmental protection, but soft and light, low material strength.

 

The advantages of glass door lock set:

1. Light weight, high strength, do not apply, not easy to rust, aging resistance, long life.

Durable, environmentally friendly, high safety factor, open mode diversification, not easy to deform.

Easy processing, simple operation, moderate price, light transport.

It is currently the best cost-effective door and window choice.

If the surface wants to be coated, it is also very easy to anodize the treatment. Resistant to all kinds of environments, not afraid of moisture, can be used in harsher environments.

 

Product installation and inspection is no problem, then remove the product, wait for the door to brush the paint and dry through (recommended preferably in two or three days or more) and then re-install the aluminum alloy lock, the purpose is: to avoid paint glued to the aluminum glass door lock set, Affects appearance and performance (often due to the paint stuck to the aluminum glass door lock to make its transmission inflexible) because the paint is not dry chemical gas will corrode the product, accelerate the product surface treatment changes, affect the appearance and reduce the life of aluminum glass door lock.

 

Lubricants are always kept in the drive area of the aluminum alloy lock body. to keep its transmission smooth and extend its service life.

Regular use of lubricants: Aluminum locks can be applied to the aluminum alloy lock core groove during use, regularly (half a year or one year) or when key insertion is not smooth, can be applied to the aluminum alloy lock core groove small graphite powder or pencil powder to ensure smooth key insertion. However, do not add any other oil for lubrication, to avoid grease stuck to the spring, resulting in aluminum alloy lock can not turn and can not open.

 

Often check the aluminum alloy lock body and aluminum alloy locking plate matching gap: aluminum alloy locking tab and aluminum alloy locking plate hole is suitable for high and low fit.

 

Glass door aluminum alloy locks should pay attention to their maintenance and maintenance during the use process. Position the hinges or aluminum locking plates on the door should be adjusted. At the same time pay attention to the weather (wet spring, dry winter) caused by the cold and shrinking heat expansion, to ensure that the door and door frame, aluminum alloy lock body and aluminum alloy locking plate gap fit well.